A Command reference
This chapter lists and describes the MPX200 CLI commands in alphabetical order. Each command
description includes syntax, keywords, notes, and examples.
Command syntax
The MPX200 CLI command syntax uses the following format:
keywordcommand
keyword [value]
keyword [value1] [value2]
The command is followed by one or more keywords. Consider the following rules and conventions:
• Commands and keywords are not case sensitive.
• Required keyword values appear in standard font within brackets: [value].
• Optional keyword values appear in italics within brackets: [value].
• In command prompts, <1> or <2> indicate which blade is being managed.
Command line completion
The command line completion feature makes entering and repeating commands easier. Table 31
describes the command line completion keystrokes.
Table 31 Command line completion keystrokes
DescriptionKeystroke
Completes the command line. Enter at least one character and press the Tab key to
complete the command line. If there is more than one possibility, press Tab again
to display all possibilities.
Tab
Scrolls backward through the list of previously entered commands.Up arrow
Scrolls forward through the list of previously entered commands.Down arrow
Moves the cursor to the beginning of the command line.Ctrl+A
Moves the cursor to the end of the command line.Ctrl+B
Authority requirements
You must be in an administrator (Admin) session to perform various set commands. Note that:
• Commands for monitoring tasks are available to all accounts.
MPX200 Multifunction Router 263
To Next Page
Loading...
Need help?
General