HP StorageWorks 6400/8400 - Enterprise Virtual Array

Show perf
Displays the port, read, write, initiator, or target performance, in bytes per second (b/s).
NoneAuthority
[byte | init_rbyte | init_wbyte | tgt_rbyte
| tgt_wbyte ]
show
perf
Syntax
Displays performance data for all ports.
byte
Keywords
Displays initiator mode read performance.
init_rbyte
Displays initiator mode write performance.
init_wbyte
Displays target mode read performance.
tgt_rbyte
Displays target mode write performance.
tgt_wbyte
Example 1:
MPX200 <1>#> show perf
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 0 0 0 0 0
GE2 0 0 0 0 0
FC1 0 0 0 0 0
FC2 0 0 0 0 0
Example 2:
MPX200 <1>#> show perf byte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (total)... (Press any key to stop display)
GE1 GE2 FC1 FC2
--------------------------------
0 0 0 0
0 0 0 0
0 0 0 0
Example 3:
MPX200 <1>#> show perf init_rbyte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (initiator mode read)... (Press any key to
stop display)
GE1 GE2 GE3 GE4 FC1 FC2
------------------------------------------------
0 0 0 0 0 0
MPX200 Multifunction Router 297