Applies license keys to the router. See “set features
command” on page 281.
features
Sets the iSCSI port parameters. See “set iSCSI
command” on page 282.
iscsi [<PORT_NUM>]
Sets the Internet Simple Name Service (iSNS)
parameters. See “set iSNS com-
mand” on page 282.
isns
Sets the management port parameters. See “set
mgmt command” on page 283.
mgmt
Sets the NTP parameters. See “set NTP com-
mand” on page 283.
ntp
Configures CLI properties for the blade. See “set
properties command” on page 284.
properties
Sets the Simple Network Management Protocol
(SNMP) parameters, such as the symbolic name
and log level. See “set SNMP com-
mand” on page 284.
snmp
Sets system parameters, such as the symbolic
name and log level. See “set system com-
mand” on page 285.
system
Sets VPGs on the blade. See “set VPGroups
command” on page 286.
vpgroups [vpgroup index]
Set alias
Assigns an alias name to a presented iSCSI target.
Admin sessionAuthority
set alias
Syntax
Example:
MPX200 <2> (admin) #> set alias
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9
1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9
2 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070ce9
3 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070ce9
4 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070cec
5 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070cec
6 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070cec
7 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070cec
Please select a iSCSI node from the list above ('q' to quit): 0
A list of attributes with formatting and current values will follow.
MPX200 Multifunction Router 279