8 Support and other resources
This user guide provides information to help you do the following:
• Understand the MPX200 options and configurations
• Plan the installation of the MPX200
• Install the MPX200
• Configure the MPX200 for iSCSI
• Install an additional MPX200 blade option for high availability
• Configure the MPX200 for iSCSI multipath support
• Install iSCSI software and hardware iSCSI initiators for different operating systems
• Configure EVA iSCSI logical unit numbers (LUNs) using HP Command View EVA
• Manage the MPX200 using HP Command View EVA
• Troubleshoot the MPX200
• Use the Command Line Interface (CLI)
• Interpret error messages
Intended audience
This guide is intended for system administrators with knowledge of:
• HP StorageWorks EVA4x00/6x00/8x00 storage systems
• Configuring LUNs using HP Command View EVA
• HP Fibre Channel storage area networks (SANs)
• Ethernet
• TCP/IP networking
• iSCSI
Related documentation
The following sources provide related information:
• HP StorageWorks MPX200 Multifunction Router EVA iSCSI connectivity quick start instructions for
Microsoft Windows
• HP StorageWorks MPX200 Multifunction Router release notes
• HP StorageWorks Command View EVA user guide
• HP StorageWorks Interactive Help for HP Command View EVA
• HP StorageWorks Enterprise Virtual Array user guide for your array
• HP StorageWorks SAN design reference guide
You can also find the documents referenced in this guide on the Manuals page of the HP Business
Support Center website:
http://www.hp.com/support/manuals
MPX200 Multifunction Router 259
To Next Page