show perf byte
Displays the active job performance in bytes.
Session: miguser
Example:
MPX200 (miguser) #> show perf byte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (total)... (Press any key to stop display)
GE1 GE2 FC1 FC2
--------------------------------
0 0 189M 189M
0 0 188M 188M
0 0 182M 182M
0 0 187M 187M
0 0 188M 188M
0 0 186M 186M
0 0 187M 187M
0 0 186M 186M
0 0 170M 170M
0 0 189M 189M
MPX200 Multifunction Router 229
To Next Page
Loading...
