Failed memory allocation for Diagnostic API.ErrorUser
QBRPC_Initialize:Diag Mem
Allocation error
139298
Failed memory allocation for Diagnostic Log
API.
ErrorUser
QBRPC_Initialize:DiagLog
Mem Allocation error
139299
Failed memory allocation for FRU Image API.ErrorUser
QBRPC_Initialize:FruImage
Mem Allocation error
139300
Failed memory allocation for OEM Manufac-
turing API.
ErrorUser
QBRPC_Initialize:OemMfg
Mem Allocation error
139301
Failed memory allocation for Status API.ErrorUser
QBRPC_Initialize:Status
Mem Allocation error
139302
Failed memory allocation for TCP/IP Statistics
API.
ErrorUser
QBRPC_Initialize:TcpIp-
Stats Mem Allocation er-
ror
139303
Failed memory allocation for NTP Status API.ErrorUser
QBRPC_Initialize:NtpStats
Mem Allocation error
139304
Failed memory allocation for LUN List API.ErrorUser
QBRPC_Initialize:LunList
MemAlloc error
139305
RPC free resources entry point.ErrorUser
QBRPC_FreeResources:Entered
139315
Detected duplicate IP address for management
port.
ErrorUser
checkDuplicateIp: Detec-
ted Error %08x %08x%04x
139553
A firmware upgrade was performed, the new
version is: d.d.d.d.
InfoUser
FW Upgrade performed: new
version is: %d.%d.%d.%d
151842
User issued a REBOOT or SHUTDOWN com-
mand.
InfoUser
REBOOT/SHUTDOWN Command
from user. Code=%d
151843
FC port configuration has changed.InfoUser
#%d: qapisetfcinterface-
params_1_svc: FC port
configuration changed
151889
iSCSI port configuration has changed.InfoUser
#%d: qapisetiscsiinterfa-
ceparams_1_svc: iSCSI
port configuration
changed
151890
iSNS configuration has changed.InfoUser
#%d: qapiset-
isns_1_svc:iSNS configur-
ation changed
151891
NTP configuration has changed.InfoUser
qapisetntpparams_1_svc:
NTP configuration changed
151892
VLAN configuration has changed.InfoUser
#%d: qapisetvlan-
params_1_svc: VLAN config-
uration changed
151893
LUN mask was added for LUN %d.
InfoUser
qapisetlunmask_1_svc:
Lunmask added for LUN %d
151894
MPX200 Multifunction Router 345
To Next Page
Loading...
Need help?
General