7. Enter the following command:
MPX200 (admin) #> fru restore
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the Enter key to do so. Type of restore
(0=full, 1=mappings only) [full]
FRU restore completed.
8. Reboot the system for the configuration to take effect.
MPX200 Multifunction Router 367
To Next Page
Loading...
Need help?
General