Iscsi Rules and Supported Maximums49
EVA Storage System Rules and Guidelines50
HP Command View EVA Management Rules and Guidelines50
- Supported MPX200 Maximums50
EVA Storage System Software51
- Features Supported for Iscsi Hosts51
- Features Not Supported for Iscsi Hosts51
Fibre Channel Switch and Fabric Support52
Operating System and Multipath Software Support52
Iscsi Initiator Rules and Guidelines52
- Support for EVA Storage System Software with MPX200 Iscsi52
- Apple Mac os X Iscsi Initiator Rules and Guidelines53
- Microsoft Windows Iscsi Initiator Rules and Guidelines53
- Linux Iscsi Initiator Rules and Guidelines53
- Sun Solaris Iscsi Initiator Rules and Guidelines54
- Vmware Iscsi Initiator Rules and Guidelines54
Supported IP Network Adapters55
IP Network Requirements55
Setting up the Iscsi Initiator55
- Windows Server Iscsi Initiator55
Installing the Windows Server 2003 Kit56
- Installation Wizard57
Iscsi Initiator Properties: Discovery Tab57
Adding a Host58
- Virtual Disk Properties59
Host Details59
- Targets Tab60
Select Features Page62
MPIO MPIO Properties Page before Reboot63
- MPIO Properties Page after Reboot63
  - Installing the MPIO Feature for Windows Server 200364
  - Microsoft Windows Server 2003 Scalable Networking Pack64
- Software Update Installation Wizard64
Discover Targets66
- Add Static IP Address66
- Discovered Targets List67
- Isns Discovery and Verification67
- Discovered Targets68
Selecting the Newly Added Target69
Select Status69
- Setting up Storage for Apple Mac os X70
- Iscsi Initiator Setup for Linux70
  - Installing and Configuring the SUSE Linux Enterprise 10 Iscsi Driver70
Presented EVA Luns70
- Configure the Iscsi Initiator and Targets71
- Discovered Targets Tab71
Log in to the Target72
- Connected Targets Tab73
- Configuration Tab78
- Firewall Properties Dialog Box79
- General Properties Dialog Box80
Add Send Target Server Dialog Box81
- Configuring Multipath with the Solaris 10 Iscsi Initiator82
- Rescan Dialog Box82
Iscsi Initiator MPIO Properties92
- Microsoft MPIO with Qlogic Iscsi HBA93
Microsoft Iscsi Initiator Installation Page94
- Connect to Host Window95
  - Start General Configuration Wizard95
  - Adding Targets to the Qlogic Iscsi Initiator96
- HBA Port Target Configuration Window96
Target Settings Tab96
- Presenting Luns to the Qlogic Iscsi Initiator97
- Installing the HP MPIO Full Featured DSM for EVA97
Iscsi HBA Port Connections97
- Microsoft Windows Cluster Support98
  - Microsoft Cluster Server for Windows 200398
- HP MPIO DSM Manager with Iscsi Devices98
  - Microsoft Cluster Server for Windows 200899
- Iscsi Persistent Reservation Setup99
CHAP Single-Direction Settings102
- Enabling CHAP for the MPX200-Discovered Iscsi Initiator Entry103
- Enabling CHAP for the Microsoft Iscsi Initiator103
- Enabling CHAP for the Open-Iscsi Iscsi Initiator104
- Enabling Single-Direction CHAP During Discovery Session and Bi-Directional CHAP During Normal Session106
CHAP Single-Direction Settings106
- Enabling Bi-Directional CHAP During Discovery Session and Single-Direction CHAP During Normal Session107
CHAP Bi-Directional Settings107
- Enabling Bi-Directional CHAP During Discovery Session and Bi-Directional CHAP During Normal Session110
CHAP Bi-Directional Settings110

Mpx200 Fcip113

Offline Data Migration139

Diagnostics and Troubleshooting249

Support and Other Resources259

A Command Reference263

B Command Line Interface Usage307

C Simple Network Management Protocol Setup311

D Log Messages331

E Regulatory Compliance and Safety355

F Saving and Restoring the MPX200 Configuration365

G Data Migration Best Practices369

Index403

Brand	HP
Model	StorageWorks 6400/8400 - Enterprise Virtual Array
Category	Storage
Language	English

HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

Table of Contents

Questions and Answers:

HP StorageWorks 6400/8400 - Enterprise Virtual Array Specifications

Related product manuals