EasyManuals Logo

HP StorageWorks MSL2024 User Manual

HP StorageWorks MSL2024
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #211 background imageLoading...
Page #211 background image
Details and SolutionDescriptionEvent code
Insert a valid cleaning cartridge into the
Library.
Autoclean media warning; not enough media
present to support autocleaning.
86
Replace the drive with a compatible tape
drive.
Drive not supported; the tape drive was
disabled because it cannot be used in this
Library.
87
• Verify that the firmware image is correct
for the tape drive.
• Retry the operation.
• Retry using an alternate firmware upgrade
method.
Drive firmware revision has not changed after
a tape drive firmware upgrade.
88
• Verify that the indicated fan is operational
and not physically obstructed.
• Upgrade to the latest version of firmware.
NOTE:
The sub-error code indicates the affected
power supply. 00 is the bottom power
supply. 01 is the second power supply.
Power supply fan has failed. Redundancy
may be at risk.
89
• Check the AC power cable connection.
• Verify that the indicated power supply is
correctly installed and the thumbscrews
are tight.
NOTE:
The sub-error code indicates the affected
power supply. 00 is the bottom power
supply. 01 is the second power supply.
Power supply has failed. Redundancy is not
available.
8A
• Check the AC power cable connections.
• Verify that both power supplies are cor-
rectly installed and the thumbscrews are
tight.
One of the redundant power supplies has
failed.
8B
Install new Library firmware, which will install
a compatible robotics firmware version.
Invalid robotics code; does not match with
the loaded Library firmware.
8C
Obtain a new cleaning tape for use when
the current cleaning tape expires.
Cleaning tape nearly expired. Only one or
two cleaning operations remain.
8E
Contact HP Service if this unexpected
condition occurs.
I
2
C bus recovery
8F
• Verify that both power supplies are cor-
rectly installed and the thumbscrews are
tight.
• Check AC power cable connections
NOTE:
The MSL2024 does not have a redundant
power supply option.
Power supply has failed. Master Library
power redundancy not available.
90
Power supply has failed. Lower Library power
redundancy not available.
91
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
guide 211

Table of Contents

Other manuals for HP StorageWorks MSL2024

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StorageWorks MSL2024 and is the answer not in the manual?

HP StorageWorks MSL2024 Specifications

General IconGeneral
Number of Slots24
Number of Drives1 or 2
Tape TechnologyLTO Ultrium
Drive Bays1 or 2
InterfaceSCSI, SAS
Drive TypeLTO-3, LTO-4
Supported DrivesLTO-3, LTO-4
Operating System SupportWindows, Linux, HP-UX, Solaris, AIX
Dimensions8.9 x 48.0 x 44.8 cm

Related product manuals