HP StoreOnce B6000 Series User Manual

5. Click Start Replication Wizard and proceed to the Select Target Appliance step.
TIP: Click on the show/hide details link to check how many target appliances are permitted
and the number of target appliances that are currently configured.
6. Select a Target Appliance from the list and click Next.
NOTE: If you want to select an appliance that is not yet on the list, click Add Target Appliance.
Enter the Target Appliance IP Address or fully qualified domain name. The default values for
the Command and Data Protocol Port Numbers are usually acceptable, but may be edited if
there is a conflict. (If replication needs to take place through a firewall, the network
administrator will need to open (TCP) ports 9387 (Command protocol) and 9388 (Data
protocol) to allow the replication traffic to pass to and from the HP StoreOnce Backup Systems.)
Click Add Target Appliance.
VT Mappings (Replication) 75

HP StoreOnce B6000 Series Specifications

General

Brand	HP
Model	StoreOnce B6000 Series
Category	Storage
Language	English