Front panel LEDs and buttons
Item Description Status Definition
1 Power On/Standby button and
system power LED
1
Solid green Normal
Flashing green Performing power-on sequence
Solid amber System in standby
O No power present
2
2 Health LED
1
Solid green Normal
Flashing green iLO is rebooting.
Flashing amber System degraded
3
Flashing red System critical
3
3 NIC status LED
1
Solid green Linked to network
Flashing green Network active
O No network activity
1
When all three LEDs described in this table simultaneously, a power fault has occurred. For more information, see
Front panel LED
power fault codes.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the front
I/O cable is disconnected.
3
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
Component identification 98
To Next Page
Loading...
