HPE ProLiant ML110 Gen10

Front panel LED power fault codes
The following table provides a list of power fault codes, and the subsystems that are aected. Not all power faults are
used by all servers.
Subsystem LED behavior
System board 1 flash
Processor 2 flashes
Memory 3 flashes
Riser board PCIe slots 4 flashes
FlexibleLOM 5 flashes
Storage controllers 6 flashes
System board PCIe slots 7 flashes
Power backplane or storage backplane 8 flashes
Power supply 9 flashes
Rear panel components
Item
Description
1 Standard power supply (non-hot-plug)
2 Kensington security slot
3 Padlock eye
4 Flexible Slot power supply 1 (hot-plug)
5 Flexible Slot power supply 2 (hot-plug)
6 NIC port 1
1
Table Continued
Component identification 99