a. Allow the heatsink to cool.
b. Loosen the heatsink nuts in the order specified by the label on the heatsink.
c.
Lift the processor heatsink assembly and move it away from the system board.
d.
Turn the assembly over and place it on a work surface with the processor facing up.
e.
Install the dust cover.
17.
Remove the screws securing the system board on the server tray, and then remove the system board.
Replacing the system board assembly
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
Removal and replacement procedures
85
To Next Page
Loading...
