HT FULLTEST3 - PREPARATION TO USE; Preliminary Checks; Power Supply; Storage

FULLTEST3
EN - 8
x RCD test
¾ AC, A and B type.
¾ General, selective and delayed characteristic.
¾ Voltage range 100 ... 265 V.
¾ Limit contact voltage 25 or 50 V.
¾ I
'N = 10, 30, 100, 300, 500, 650 or 1000 mA.
¾ Trip out time at I
'N/2 (AC, A and B type).
¾ Trip out time at I
'N (AC, A and B type).
¾ Trip out time at 2I
'N (AC and A type).
¾ Trip out time at 5I
'N (AC and A type) or at 4I'N (B
type).
¾ Ramp test (AC, A and B type).
¾ AUTO test (AC, A and B type).
¾ Visual and acoustic warning in case of exceeded limit
value.
EN61557-6
x Global earth resistance without RCD’s tripping
¾ Selectable test current with regard to involved RCD.
¾ I
'N = 10, 30, 100, 300, 500, 650 or 1000mA.
¾ Measurement with I
'N/2 (without tripping out RCD)
¾ Voltage range 100 y 265 V.
¾ Contact voltage U
C measured during the
measurement.
¾ Limit value (R
A) fixed to 25 or 50 V/I'N, visual and
acoustic warning in case of exceeded value.
x Residual voltage
¾ Measurement on power plug (2-wire method).
¾ Measurement on internal components (4-wire
method).
¾ Limit discharge time 1 s or 5 s.
¾ LINEAR or NONLINEAR mode.
¾ Visual and acoustic warning in case of exceeded limit
value.
EN60204-1-§18.5
x Functional tests (on test socket)
¾ Apparent power P
APP.
¾ Real power P.
¾ Mains voltage U
L/N.
¾ Load current I
L.
¾ Power factor PF.
¾ Leakage current I
PE (differential method).
¾ Internal phase position exchange.
¾ Limit value (apparent power) adjustable, visual and
acoustic warning in case of exceeded value.
x AC Current with external clamp (optional)
¾ Measurement in combination with HT96U current
clamp.
¾ Three ranges 1 A, 100 A and 1000 A.
¾ Limit value adjustable, visual and acoustic warning in
case of exceeded value.