EasyManua.ls Logo

HT FULLTEST3 - General Specification; Accessories

HT FULLTEST3
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FULLTEST3
EN - 95
10.6. GENERAL SPECIFICATION
POWER SUPPLY
Mains supply voltage: 207V y 253V / 50/60Hz ± 5%
Current consumption: 16 Amax
MECHANICAL SPECIFICATIONS
Dimensions (L x W x H): 400 x 300 x 170 mm ; (16 x 12 x 7in)
Weight: 15kg (31lv)
Mechanical protection: IP40
MEMORY AND INPUT/OUTPUT INTERFACES
Internal memory: 999 locations (3 levels memory structure)
PC interface: USB 2.0 device, connector type “B”
USB keyboard, USB printer 2 x USB 2.0 host, connector type “A”
USB barcode reader, pen drive 2 x USB 2.0 host, connector type “A”
Pen drive requirements: FAT32 with a sector size of 64GB
Warning lamp: For dielectric test
Keyboard for remote controls
START/STOP/SAVE keys: Yes
Bluetooth interface connection: Yes
PROTECTION FUSES
F1 Fuse: type T16A/250V, 5×20mm, 1.5kA
F2 Fuse: type T16A/250V, 5×20mm, 1.5kA
F3 Fuse: type FF12.5A/500V, 6.3×32mm, 1.5kA
F4 Fuse: type T20A/500V, 6.3x32mm, 1.5kA
ENVIRONMENTAL CONDITIONS
Reference temperature: 23°C ± 5°C (73°F ± 41°F)
Working temperature: y 40°C (32°F y 104°F)
Reference humidity: <60% RH w/o condensation
Working humidity: <80% RH w/o condensation
Storage temperature: -10 y 60°C (14°F y 140°F)
Storage humidity: <80% RH w/o condensation
REFERENCE GUIDELINES
Instrument safety: IEC/EN61010-1
EMC: IEC/EN61326-1
Safety tests: IEC/EN60204-1; IEC/EN61439-1; IEC/EN60335-1
Technical literature: IEC/EN61187
Instrument: IEC/EN61557-1-2-3-4-6-13-14
Safety dielectric test : EN50191
GENERAL CHARACTERISTICS
Display: 4.3 inch colour TFT LCD with touch screen,
Limit value setting: See each function separately
Warning in case of exceeded limit values: optic and acoustic
Insulation: Protection class I (protection conductor)
Pollution degree: 2
Measurement category: CAT II 300V (Power), CAT III 300V (other tests)
Altitude above sea level: 2000m (6562ft)
This instrument complies with requirements of Low Voltage Directive
2014/35/EU (LVD) and of EMC Directive 2014/30/EU
This instrument complies with requirements of European Directive 2011/65/EU
(RoHS) and 2012/19/EU (WEEE)
10.7. ACCESSORIES
Please see enclosed packing list

Table of Contents

Related product manuals