HT FULLTEST3 - MAIN MENU DESCRIPTION; Memory Menu

FULLTEST3
EN - 12
8. IEC female connector for connection of warning lamp in DIELECTRIC test
(optional accessory FT3R-GLP)
9. USB1 connector for connection with PC
10. USB2 and USB3 connectors for connection of USB stick, USB barcode reader
(optional accessory FT3BARCR), USB printer (optional accessory FT3MPT2),
USB keyboard (optional accessory FT3KBDEN) or Loop/Line impedance meter
with high resolution (optional accessory IMP57)
11. Negative R
INS terminal
12. Positive R
INS terminal
13. R
PE current generator terminal
14. SENSE voltage terminal for RPE 4-wire test
15. Fuse F4 – Protection in R
PE measurement.
16. SENSE voltage terminal for RPE 4-wire test
17. R
PE current generator terminal
18. FUNC hard key to select measurement function
19. SAVE hard key to save test result
20. START/STOP button which starts or stops selected measurement
21. RCL hard key to recall saved result
22. MENU hard key to open Main Menu
23. EXIT hard key to exit existing screen and return it one step back.
24. Color LCD touch-screen display
25. Mains test socket for POWER and LEAKAGE measurement.
26. CLAMP connector for optional accessory HT96 current clamp
27. U
RES measurement terminal
28. U
RES measurement terminal
29. L/TRIG/L1 terminal for LOOP,R
A,RCD,PHASE SEQUENCE and URES
measurements
30. PE/L3 terminal for LOOP, R
A, RCD and PHASE SEQUENCE measurements
31. N/TRIG/L2 terminal for LOOP,RCD,PHASE SEQUENCE and U
RES
measurements
32. DIELECTRIC test terminal for test voltages 2.51 y 5.10 kV
33. DIELECTRIC test terminal for test voltages 0.81 y 2.50 kV
34. DIELECTRIC test terminal for test voltages 0.25 y 0.80 kV
35. DIELECTRIC on lamp. It lights when DIELECTRIC test is running
36. DIELECTRIC COM (common) test terminal.