6.1 Setting Video and Audio Stream Parameters
You can set video and audio parameters based on the site requirements.
6.1.1 Setting Video Stream Parameters
You can set video parameters based on the site requirements, such as stream type, coding
protocol, and resolution.
Context
Table 6-1 describes different resolution types.
Table 6-1 Resolution type description
Resolution Type
Description
1080p The resolution of 1080p is 1920 x 1080, about 2,000,000 pixels.
1024p The resolution of 1024p is 1280 x 1024, about 1,300,000 pixels.
960p The resolution of 960p is 1280 x 960, about 1,200,000 pixels.
720p The resolution of 720p is 1280 x 720, about 900,000 pixels.
D1_PAL The resolution of D1_PAL is 720 x 576, about 400,000 pixels.
D1_NTSC The resolution of D1_NTSC is 720 x 480, about 350,000 pixels.
CIF_PAL The resolution of CIF_PAL is 352 x 288, about 100,000 pixels.
CIF_NTSC The resolution of CIF_NTSC is 352 x 240, about 84,000 pixels.
Procedure
Step 1 Choose Settings > Channel Configuration > Video&Audio Stream Parameters.
The Video&Audio Stream Parameters page is displayed, as shown in Figure 6-1.
IPC6221-VRZ-SP
Configuration Guide
6 Setting Video Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33
To Next Page
Loading...
