6 Setting Video Parameters
About This Chapter
This section describes how to set video parameters, such as video and audio stream
parameters.
6.1 Setting Video and Audio Stream Parameters
You can set video and audio parameters based on the site requirements.
6.2 Configuring a Stream Package
By configuring a stream package, you can predefine several common video and audio stream
parameters for quick invoking in the future.
6.3 Setting ISP Parameters
By setting Image Signal Processing (ISP) parameters, you can adjust video images to adapt to
different surveillance scenarios.
6.4 Configuring an ISP Package
By configuring an ISP package, you can predefine several common ISP parameters for quick
invoking in the future.
6.5 Setting ROI Parameters
By setting a region of interest (ROI), you can set the ROI quality to differentiate the ROI from
other image regions. The ROI effect is prominent at a low bit rate.
6.6 Setting Privacy Mask Parameters
You can set a privacy mask area on the live video for privacy protection.
6.7 Setting Motion Detection Parameters
An alarm is generated when an object moves within the specified surveillance range of the
camera.
IPC6221-VRZ-SP
Configuration Guide
6 Setting Video Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
To Next Page
Loading...
