8 Setting PTZ Control Parameters
About This Chapter
8.1 Setting PTZ and Serial Port Parameters
You can set parameters for connecting the PTZ to cameras through the serial port, for
example, serial port parameters and transparent channel parameters.
8.2 Setting Preset Position Parameters
After a preset position is configured, you can quickly rotate the IPC to the required position.
You can add, modify, and delete preset positions. A maximum of 256 preset positions can be
added for an IPC.
8.3 Setting Tour Track Parameters
You can set a tour track that consists of multiple preset positions. After you enable the tour
track, the IPC shoots video along the tour track. You can set a maximum of eight tour tracks.
A maximum of thirty-two preset positions can be added to a single tour track.
IPC6221-VRZ-SP
Configuration Guide
8 Setting PTZ Control Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
To Next Page
Loading...
