Huawei IPC6221-VRZ-SP - Setting Parameters for a GB;T 28181-Based Connection

Parameter Description
Device ID Unique IPC ID.
NOTE
The value of this parameter must be the same as
the device ID (the code of the IVS platform, the
parameter name is Code) configured on the
video surveillance platform. If they are different,
the IPC will fail to connect to the video
surveillance platform.
Step 4 Click Save.
----End
3.2.2 Setting Parameters for a GB/T 28181-based Connection
When the GB/T 28181 protocol is used when connecting IPCs to the platform, you need to set
the GB/T 28181 parameters.
Context
To connect the IPC to the video surveillance platform using the GB/T 28181 protocol, set the
connection parameters on the video surveillance platform and then on the IPC to avoid
connection failure.
Procedure
Step 1 Choose Settings > System Configuration > Platform Connection Parameters.
The page for setting platform connection parameters is displayed.
Step 2 Choose GB/T 28181 in Protocol type.
The GB/T 28181 parameter setting page is displayed.
IPC6221-VRZ-SP
Configuration Guide
3 Setting Basic Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13