Huawei IPC6221-VRZ-SP - Page 70

Parameter Description
Confirm password This parameter is available only when you set Security to
Authentication or Authentication and privacy.
Confirm password for user authentication.
Privacy protocol This parameter is available only when you set Security to
Authentication and privacy.
Privacy protocol for user authentication.
Privacy This parameter is available only when you set Security to
Authentication and privacy.
Key for user authentication.
NOTE
The key must meet the following requirements:
l The key consists of 8 to 20 characters.
l The key contains at least two types of the following: lowercase
letters (a to z), uppercase letters (A to Z), digits (0 to 9), and special
characters (including the space character and the following: `~!@#$
%^&*()-_=+\|[{}];:'",<.>/?).
l The key must be different from the user name or the reverse text of
the user name.
l To improve security, the value of Privacy must be different from
Authentication protocol.
Confirm privacy Confirm key for user authentication.
Step 4 Click Save.
----End
IPC6221-VRZ-SP
Configuration Guide
7 Setting Network Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64