Table 7-1 Parameter description
Parameter Description
Receiver IP NMS IP address.
Receiver port NMS port number.
Version Version number of the SNMP protocol used for connecting the
IPC to the NMS.
Community name This parameter is available only when you set Version to v1 or
v2.
Community name for the IPC to access the NMS.
User name This parameter is available only when you set Version to v3.
User name for the IPC to access the NMS.
Security level This parameter is available only when you set Version to v3.
Security level of user rights. The options are as follows:
l No security
Users are not allowed to view or modify IPC configurations.
l Authentication
Users can only view IPC configurations.
l Authentication and privacy
Users can view and modify IPC configurations.
Authentication protocol This parameter is available only when you set Version to v3
and Security level to Authentication or Authentication and
privacy.
Protocol used for IPC authentication.
Authentication
password
This parameter is available only when you set Version to v3
and Security level to Authentication or Authentication and
privacy.
Password used for IPC authentication.
NOTE
It is recommended that the password meet the following conditions:
l The password consists of 8 to 20 characters.
l The password contains at least two types of the following:
lowercase letters (a to z), uppercase letters (A to Z), digits (0 to 9),
and special characters (including the space character and the
following: `~!@#$%^&*()-_=+\|[{}];:'",<.>/?).
l The password must be different from the user name or the reverse
text of the user name.
Privacy protocol This parameter is available only when you set Version to v3
and Security level to Authentication and privacy.
Private key encryption protocol used for IPC authentication.
IPC6221-VRZ-SP
Configuration Guide
7 Setting Network Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
61
To Next Page
Loading...
