Figure 6-5 Initial power-on
Table 6-2 Preset Password
User Preset Password Permission Description
admin
(administrator
user)
000001 Can set all the menus.
operator (common
user)
000001 Can only view parameters and set
some parameters.
● User operator can access customer and delivery parameters. The parameters
on the Advanced menu are delivery parameters. User admin can access
customer, delivery, maintenance, and R&D parameters. The parameters on the
Advanced menu are R&D parameters.
● To prevent the
eect of misoperations on the system, log in as user operator
before modifying parameters.
Conrm with Huawei technical support before
modifying parameters which cannot be modied by user operator. Otherwise,
Huawei will not be liable for any consequences of the
modication performed
by the user.
● Only
certied professionals are allowed to modify the advanced parameters.
Unauthorized modications may lead to device malfunction or damage.
● For system security purposes, change the preset password after rst login.
● After login, you are allowed to perform operations until being logged out if no
operation is performed within 3 minutes (user set). For security purposes, tap
at the lower-right corner of the screen to manually log out after
you have completed all operations.
Step 5 Set related parameters as shown in Figure 6-6 and tap Next until the controller
home screen is displayed.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 6 Power-On Commissioning
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 128
To Next Page
Loading...
Need help?
General
