Huawei NetCol5000-A050 User Manual

Menu Parameter Description Setting Guide
Settings >
Quick Settings
> System
Settings
Dual power
supply setting
You can select Primary
power rst, Primary
power only, or Backup
power rst based on
site requirements.
Set this parameter
based on site
requirements.
Primary power
rst or Backup
power
rst: Select
an option when the
dual-power model
is connected to two
power supplies.
Primary power
only: Select this
option when the
dual-power model
is connected to the
primary power only.
Outdoor unit
condensate
mode
This product supports
air-cooled or water
cooled outdoor units.
Select this parameter
based on the outdoor
unit type.
If the outdoor unit
is an air-cooled
outdoor unit, select
Air-cooled. If the
outdoor unit is a
water cooled
module, select
Water-cooled.
Temp control
intelligent
monitoring
board
The temperature
control intelligent
monitoring board is
used to detect the
outdoor ambient
temperature. Select
this parameter based
on the site
requirements.
Check the cover of
the outdoor unit
control box. If there
is a temperature
control intelligent
monitoring board,
set this parameter
to Yes. Otherwise,
set this parameter
to No.
Smart
diagnosis
function
The function includes
refrigerant shortage
detection and energy-
saving collaboration
control between indoor
and outdoor units.
The function is
enabled when a
temperature control
intelligent
monitoring board is
installed.
Altitude Set this parameter
based on the actual
altitude.
-
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 6 Power-On Commissioning
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 131

Huawei NetCol5000-A050 Specifications

General

Brand	Huawei
Model	NetCol5000-A050
Category	Computer Hardware
Language	English