Huawei NetCol5000-A050 - Page 145

Menu Parameter Description Setting Guide
Floor water
overow
alarm action
Set this parameter to
Shutdown, Inactivity,
Only indoor fan
running, or
Humidier stopped
based on site
requirements.
Retain the default
value.
In-cabinet
water
overow
alarm action
Set this parameter to
Shutdown, Inactivity,
Only indoor fan
running, or
Humidier stopped
based on site
requirements.
Retain the default
value.
Settings >
Quick Settings
> T/H Sensor
Temperature
and humidity
control type
Cold aisle, Hot aisle,
Return air, and Supply
air can be set as
required. Enable the
corresponding sensors
based on the control
type.
● When the
application
scenario is cold
or hot aisle
containment,
you are advised
to choose Cold
aisle if cold aisle
T/H sensors are
congured.
Choose Supply
air if no cold
aisle T/H sensors
are
congured.
● When the
application
scenario is non-
aisle
containment,
you are advised
to choose
Return air.
Choose Cold
aisle if cold aisle
T/H sensors are
congured.
● You are not
advised to set
this parameter
as Hot aisle.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 6 Power-On Commissioning
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 135