After Encryption operation CBC is set, the system automatically restarts. Exercise
caution when performing this operation.
Figure 6-19 Restart warning
Table 6-10 Modbus TCP parameter settings
Parameter Setting Setting Method
Link mode Server,
Client, Server
and client
● If you set Link mode to Server, the smart
cooling product, as a server, supports two client
connection and establishes communication.
● If you set Link mode to Client, the smart
cooling product, as a client, can connect to a
remote server and establish communication.
● If you set Link mode to Server and client, the
smart cooling product, as a server, supports two
client connection and establishes
communication. In addition, the smart cooling
product, as a client, can connect to a remote
server and establish communication.
Client
encryption
Enable,
Disable
This parameter is congurable when Link mode is
set to Client.
Server
encryption
Enable,
Disable
This parameter is congurable when Link mode is
set to Server.
Encryption
operation
CBC
Enable,
Disable
Encryption operation CBC is enabled by default.
Determine whether to use the encryption
operation CBC when connecting to other devices
based on the site requirements.
NMS IP
address
- Enter the actual IP address of the NMS. IP
addresses of the display panel, NMS client, and
NMS server must be unique. This parameter is
congurable when Link mode is set to Client.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 6 Power-On Commissioning
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 153
To Next Page
Loading...
Need help?
General
