Huawei NetEngine 8000 F User Manual

Figure 4-93 Components of a cord end terminal and a power cable
A. Cord end terminal B. Insulation layer of a
power cable
C. Conductor of a power
cable
Procedure
1. Strip a part of the insulation layer to expose the cable conductor with a
length of L1, as shown in Figure 4-94. Determine the value of L1 based on
the cross-sectional area of the cable conductor. The recommended values of
L1 are listed in Table 4-21.
NO TICE
When you strip a power cable, do not damage the conductor of the cable.
Figure 4-94 Stripping a power cable (cord end terminal)
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 452

Huawei NetEngine 8000 F Specifications

General

Brand	Huawei
Model	NetEngine 8000 F
Category	Network Router
Language	English