Cabinet Material
The cabinet is made of class-A high-strength carbon cold rolled steel and
galvanized sheet, which complies with the Restriction of the use of certain
Hazardous Substances (RoHS). The re endurance of interior materials complies
with Underwriter Laboratories (UL) standards.
The cabinet complies with International Electrotechnical Commission (IEC)
60297-1. The distance between front and rear mounting rails is adjustable in 25
mm increments. Its assembled architecture facilitates capacity expansion.
The cabinet has the following features and functions:
●
Sucient space to place and connect components.
● Ability in protecting internal components from contamination.
● Ability in preventing damage to internal components.
Cabling
The cabinet supports overhead or
underoor cabling.
ESD Jack
The cabinet has an ESD jack, as shown in Figure 4-188. When installing or
maintaining devices in the cabinet, wear an ESD wrist strap and insert the other
end of the ESD wrist strap in the ESD jack.
A cabinet provides multiple grounding points. You can choose the nearest one.
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 526
To Next Page
Loading...
Need help?
General
