Huawei Quidway S3100 Series

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches Chapter 1
MSTP Configuration
Huawei Technologies Proprietary
1-34
System View: return to User View with Ctrl+Z.
[Quidway] stp bpdu-protection
Caution:
The BPDU protection function does not take effect on the Gigabit ports that cannot be
shut down.
1.5.4 Root Protection Configuration
I. Configuration procedure
Table 1-30 Enable the root protection function on specified ports in system view
Operation Command Description
Enter system view
system-view
—
Enable the root
protection function
on specified ports
stp interface interface-list
root-protection
Required
The root protection function is
disabled by default.
Table 1-31 Enable the root protection function on a port in Ethernet port view
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable the root
protection function
on current port
stp root-protection
Required
The root protection function is
disabled by default.
II. Configuration example
# Enable the root protection function on Ethernet1/0/1 port.
z Configure in system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp interface ethernet1/0/1 root-protection
z Configure in Ethernet port view.
<Quidway> system-view