Huawei Quidway S3100 Series User Manual

Operation Manual – FTP and TFTP
Quidway S3100 Series Ethernet Switches Chapter 1
FTP and TFTP Configuration
Huawei Technologies Proprietary
1-6
Operation Command Description
Rename a file on a
remote host.
rename remote-source
remote-dest
Optional
Switch to another
FTP user
user username [ password ] Optional
Connect to a
remote FTP server
open { ip-address |
server-name } [ port ]
Optional
Terminate the
current FTP
connection without
exiting FTP client
view
disconnect
Optional
Terminate the
current FTP
connection without
exiting FTP client
view
close
Optional
Terminate the
current FTP
connection and
quit to user view
quit
Optional
Terminate the
current FTP control
connection and
data connection
bye
Optional
Display the on-line
help on a specified
command
concerning FTP
remotehelp
[ protocol-command ]
Optional
Enable verbose
function
verbose
Optional
The verbose function is
enabled by default.
1.1.4 Configuration Example: A Switch Operating as an FTP Client
I. Network requirements
A switch and a remote PC operate as an FTP client and an FTP server.
z Create a user account on the FTP server, with the user name being switch,
password being hello, and the permission to access the directory named Switch
assigned to the user account.
z The IP address of a VLAN interface on the switch is 1.1.1.1. The IP address of the
PC is 2.2.2.2. And the route between the two is reachable.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English