Huawei Quidway S3100 Series User Manual

Operation Manual – SNMP
Quidway S3100 Series Ethernet Switches Chapter 1
SNMP Configuration
Huawei Technologies Proprietary
1-6
Operation Command Description
Set the size of SNMP packet
that the Agent can
send/receive
snmp-agent packet
max-size byte-count
Optional
By default, it is 1,500
bytes.
Set the device engine ID
snmp-agent
local-engineid engineid
Optional
By default, the device
engine ID is
"Enterprise Number +
device information".
Create or update the view
information
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
Optional
By default, the view
name is ViewDefault
and OID is 1.
1.3 Configuring Trap
Trap is the information that the managed device initiatively sends to the NMS without
request. Trap is used to report some urgent and important events (e.g., the managed
device is rebooted).
1.3.1 Configuration Prerequisites
Complete SNMP basic configuration.
1.3.2 Configuration Tasks
Table 1-4 Configure Trap
Operation Command Description
Enter system view
system-view
—
Enable the device to
send Trap packets
snmp-agent trap enable
[ configuration | flash | standard
[ authentication | coldstart |
linkdown | linkup | warmstart ]* |
system | ]
Enter port
view
interface interface-type
interface-number
Enable the
port to send
Trap packets
enable snmp trap updown
Enable
the port
to send
Trap
packets
Quit to
system view
quit
Optional
By default, the
port is enabled
to send Trap
packets.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English