Huawei Quidway S3100 Series User Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches Chapter 1
Information Cente
r
Huawei Technologies Proprietary
1-13
Table 1-13 Display and debug information center
Operation Command
Display the settings of one or all
information channels
display channel [ channel-number |
channel-name ]
Display system log settings and
memory buffer record statistics
display info-center
display the status of the log buffer and
the records in the log buffer
display logbuffer [ unit unit-id ] [ level
severity | size buffersize ]* [ | { begin |
exclude | include } regular-expression ]
Display summary of the log buffer
display logbuffer summary [ level
severity ]
Display the status of the trap buffer
and the records in the trap buffer
display trapbuffer [ unit unit-id ] [ size
buffersize ]
Clear information in the log buffer reset logbuffer [ unit unit-id ]
Clear information in the trap buffer. reset trapbuffer [ unit unit-id ]
1.4 Information Center Configuration Examples
1.4.1 Log Output to a Unix Log Host
I. Network requirements
The switch sends the following log information in English to the Unix log host whose IP
address is 202.38.1.10: the log information of the two modules ARP and IP, with
severity higher than “informational”.
II. Network diagram
Switch
PC
Network
SwitchSwitch
PC
Network
Figure 1-1 Networking for log output to a Unix log host
III. Configuration procedure
1) Configure the switch:
# Enable the information center.
<Quidway> system-view
[Quidway] info-center enable

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English