Huawei Quidway S3100 Series User Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-9
2.5 Console Port Login Configuration with Authentication
Mode Being Password
2.5.1 Configuration Procedure
Table 2-6 Console port login configuration with the authentication mode being
password
Operation Command Description
Enter system view
system-view
—
Enter AUX user
interface view
user-interface aux 0 —
Configure to
authenticate users
using the local
password
authentication-mode
password
Required
Set the local
password
set authentication
password { cipher |
simple } password
Required
Set the
baud rate
speed speed-value
Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Set the
check
de
mo
parity { even | none | odd }
Optional
By default, the check mode
of a Console port is set to
none, that is, no check bit.
Set the
stop bits
stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a
Console port is 1.
Configur
e the
Console
port
Set the
data bits
databits { 7 | 8 }
Optional
The default data bits of a
Console port is 8.
Configure the
command level
available to users
logging into the user
interface
user privilege level level
Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface.
Make terminal
services available to
the user interface
shell
Optional
By default, terminal services
are available in all user
interfaces.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English