Huawei Quidway S3100 Series User Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches Chapter 1
Information Cente
r
Huawei Technologies Proprietary
1-8
Operation Command Description
Enable debug
terminal display
terminal debugging
Optional
By default, debug terminal
display is disabled for terminal
users.
Enable log terminal
display
terminal logging
Optional
By default, log terminal
display is enabled for console
users.
Enable trap
terminal display
terminal trapping
Optional
By default, trap terminal
display is enabled for terminal
users.
1.2.4 Enabling Information Output to a Monitor Terminal
Table 1-8 lists the related configurations on the switch.
Table 1-8 Enable information output to a monitor terminal
Operation Command Description
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to Telnet
terminal or dumb
terminal
info-center monitor
channel { channel-number |
channel-name }
Required
By default, the switch outputs
log information to user
terminal.
Define an
information source
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap
| debug } * { level severity |
state state } * ]
Required
Set the format of
time stamp
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
Optional
This is to set the time stamp
format for log/debug/trap
information output.
This determines how the time
stamp is presented to users.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English