Huawei Quidway S3100 Series User Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches Chapter 1
AAA&RADIUS Configuration
Huawei Technologies Proprietary
1-30
Operation Command
Display the information about
specified or all local users
display local-user [ domain isp-name |
idle-cut { disable | enable } | vlan vlan-id |
service-type { ftp | lan-access | ssh | telnet |
terminal } | state { active | block } |
user-name user-name ]
Table 1-24 Display RADIUS protocol information
Operation Command
Display the statistics about local
RADIUS authentication server
display local-server statistics
Display the configuration
information about one specific or
all RADIUS schemes
display radius [ radius-scheme-name ]
Display the statistics about
RADIUS packets
display radius statistics
Display the buffered no-response
stop-accounting request packets
display stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range start-time
stop-time | user-name user-name }
Delete the buffered no-response
stop-accounting request packets
reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range start-time
stop-time | user-name user-name }
Clear the statistics about the
RADIUS protocol
reset radius statistics
1.7 AAA&RADIUS Configuration Example
1.7.1 Remote RADIUS Authentication of Telnet/SSH Users
 Note:
The configuration procedure for the remote authentication of SSH users through
RADIUS server is similar to that of Telnet users. The following description only takes
the remote authentication of Telnet users as example.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English