Huawei Quidway S3100 Series

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches Chapter 1
QoS Configuration
Huawei Technologies Proprietary
1-17
Operation Command Description
Configure the
remote-probe
VLAN for the
remote source
mirroring group
mirroring-group group-id
remote-probe vlan
remote-probe-vlan-id
Required
Display the remote
source mirroring
group settings
display mirroring-group
remote-source
Can be executed in any view.
1.9.3 Configuration Procedure on the Intermediate Switch
Table 1-18 Configuration procedure on the intermediate switch
Operation Command Description
Enter system view
system-view
—
Create
Remote-probe
VLAN and enter
the VLAN view
vlan vlan-id
The parameter vlan-id
represents the ID of
Remote-probe VLAN.
Exit the current
view
quit
—
Enter Ethernet port
view of the Trunk
port
interface interface-type
interface-number
—
Configure to permit
Remote-probe
VLAN packets to
pass through the
Trunk port
port trunk permit vlan
remote-probe-vlan-id
Required
This setting is needed for
intermediate switch ports
connected with both the
source switch and destination
switches.
1.9.4 Configuration Procedure on the Destination Switch
Table 1-19 Configuration procedure on the destination switch
Operation Command Description
Enter system view
system-view
—
Create the
Remote-probe
VLAN and enter
the VLAN view
vlan vlan-id
The parameter vlan-id
represents the ID of
Remote-probe VLAN.