Huawei Quidway S3100 Series

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches Chapter 1
QoS Configuration
Huawei Technologies Proprietary
1-5
1.3.1 Configuration Procedure
Table 1-2 Configure port priority
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Configure port
priority level
priority priority-level
Required
Defaults to 0.
1.3.2 Configuration Example
I. Network requirements
Configure port priority level for Ethernet1/0/1.
II. Configuration procedure
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] priority 7
1.4 Configuring Packet Trust Priority
Users can configure the switch to trust the priority of inbound packets rather than
priority of the receiving port.
1.4.1 Configuration Procedure
Table 1-3 Configure packet trust priority
Operation Command Description
Enter system view
system-view
—
Configure packet
trust priority
priority trust
Required
By default, the switch replaces
802.1p priority brought by packets
with priority of the receiving port.