Huawei Quidway S3100 Series

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches Chapter 2
Cluste
r
Huawei Technologies Proprietary
2-6
Operation Command Description
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable NDP for the
Ethernet port
ndp enable
Required
2.2.2 Configuring NDP-related Parameters
Table 2-3 Configure NDP-related parameters
Operation Command Description
Enter system view
system-view
—
Configure the
holdtime of NDP
information
ndp timer aging
aging-in-seconds
The aging-in-seconds
argument is the holdtime of
NDP information.
Configure the
interval to send
NDP packets
ndp timer hello seconds
The seconds argument is the
interval to send NDP packets.
2.2.3 Enabling NTDP Globally and for Specific Ports
Table 2-4 Enable NTDP globally and for specific ports
Operation Command Description
Enter system view
system-view
—
Enable NTDP
globally
ntdp enable
Required
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable NTDP for
the Ethernet port
ntdp enable
Required
2.2.4 Configuring NTDP-related Parameters
Table 2-5 Configure NTDP parameters
Operation Command Description
Enter system view
system-view
—