Huawei Quidway S3100 Series User Manual

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches Chapter 1
MSTP Configuration
Huawei Technologies Proprietary
1-24
Operation Command Description
Disable MSTP on
the port
stp disable
Optional
By default, MSTP is enabled
on all ports after you enable
MSTP in system view.
To enable a switch to operate
more flexibly, you can disable
MSTP on specific ports. As
MSTP-disabled ports do not
participate in spanning tree
generation, this operation
saves CPU resources.
Other MSTP-related settings can take effect only after MSTP is enabled on the switch.
II. Configuration example
# Enable MSTP on the switch and disable MSTP on Ethernet1/0/1 port.
z Configure in system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp enable
[Quidway] stp interface ethernet1/0/1 disable
z Configure in Ethernet port view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp enable
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] stp disable
1.3 Leaf Node Configuration
Table 1-20 lists MSTP-related configurations about leaf nodes.
Table 1-20 Leaf node configuration
Operation Description Related section
MSTP
configuration
Required
To prevent network topology
jitter caused by other related
configurations, you are
recommended to enable
MSTP after performing other
configurations.
Section
1.2.13 “MSTP
Configuration
”
MST region
configuration
Required
Section
1.2.2 “MST Region
Configuration
”

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English