Huawei Quidway S3100 Series

Operation Manual – SSH2.0
Quidway S3100 Series Ethernet Switches Chapter 1
SSH Terminal Services
Huawei Technologies Proprietary
1-13
1.2.2 SFTP Server Configuration
The following sections describe SFTP server configuration tasks:
z Configuring service type for an SSH user
z Enabling the SFTP server
z Setting connection timeout time
I. Configuring service type for an SSH user
Table 1-9 Configure service type for an SSH user
Operation Command Remarks
Enter system view
system-view
—
Configure service type
for an SSH user
ssh user username
service-type { telnet |
sftp | all }
Optional
By default, the SSH service
type is telnet.
II. Enabling the SFTP server
Table 1-10 Enable the SFTP server
Operation Command Remarks
Enter system view
system-view
—
Enable the SFTP server
sftp server enable
Required
By default, the SFTP server
is not enabled.
III. Setting connection timeout time
After you set the timeout time for the SFTP user connection, the system will
automatically release the connection when the time is up.
Table 1-11 Set connection timeout time
Operation Command Remarks
Enter system view
system-view
—
Set timeout time for the SFTP
user connection
sftp timeout
timeout-value
Required
By default, the
connection timeout time
is 10 minutes.