Huawei Quidway S3100 Series

Operation Manual – Login
Quidway S3100 Series Ethernet Switches Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-10
Operation Command Description
Set the maximum
number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command
to disable the function to
display information in pages.
Set history command
buffer size
history-command
max-size value
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Set the timeout time
for the user interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being
10 minutes, the connection
to a user interface is
terminated if no operation is
performed in the user
interface within 10 minutes.
You can use the
idle-timeout 0 command to
disable the timeout function.
Note that the level the commands of which are available to users logging into a switch
depends on both the authentication-mode { password | scheme | none } and the
user privilege level level command, as listed in the following table.
Table 2-7 Determine the command level (B)
Scenario
Authentication
mode
User type Command
Command
level
The user privilege level
level command not
xecuted
e
Level 3
Local authentication
(authentication-m
ode password)
Users logging
into the AUX
user interface
The user privilege level
level command already
executed
Determined
by the level
argument