Huawei Quidway S3100 Series User Manual

Operation Manual – IGMP Snooping
Quidway S3100 Series Ethernet Switches Chapter 1
IGMP Snooping Configuration
Huawei Technologies Proprietary
1-9
Operation Command Description
port hybrid vlan vlan-id-list
{ tagged | untagged }
Specify the VLANs
to be allowed to
pass through the
Ethernet
port trunk pvid vlan vlan-id
Required
The multicast VLAN defined
on the Layer 2 switch must be
included and set as tagged.
Table 1-9 Configure multicast VLAN on Layer 2 switch
Operation Command Description
Enter system view
system-view
—
Enable IGMP
Snooping globally
igmp-snooping enable
Required
Enter VLAN view
vlan vlan-id
vlan-id is a VLAN ID.
Enable IGMP
Snooping on the
VLAN
igmp-snooping enable
Required
Enable multicast
VLAN
service-type multicast
Required
Exit the VLAN view
quit
—
Enter the view of
the Ethernet port
connected to the
Layer 3 switch
interface interface-type
interface-number
—
Define the port as a
trunk or hybrid port
port link-type { trunk |
hybrid }
—
port hybrid vlan vlan-id-list
{ tagged | untagged }
Specify the VLANs
to be allowed to
pass through the
Ethernet
port trunk pvid vlan vlan-id
The multicast VLAN must be
included and set as tagged.
Enter the view of
the Ethernet port
connected to a user
device
interface interface-type
interface-number
interface-type interface-num
are the interface type and
interface number.
Exit the current
view
quit
—
Define the port as a
hybrid port
port link-type hybrid
Required
Specify the VLANs
to be allowed to
pass the port
port hybrid vlan vlan-id-list
{ tagged | untagged }
Required
The multicast VLAN must be
included and set as untagged.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English