Operation Manual – IGMP Snooping
Quidway S3100 Series Ethernet Switches Chapter 1
IGMP Snooping Configuration
Huawei Technologies Proprietary
1-13
[Switch A-Vlan-interface20] ip address 168.10.1.1 255.255.255.0
[Switch A-Vlan-interface20] pim dm
[Switch A-Vlan-interface20] quit
# Configure VLAN 10.
[Switch A] vlan 10
[Switch A-vlan10] quit
# Define the Ethernet 1/0/10 port as a hybrid port, add the port to VLAN 2, VLAN 3 and
VLAN 10, and configure the port to include VLAN tags in its outbound packets for VLAN
2, VLAN 3 and VLAN 10.
[Switch A] interface Ethernet 1/0/10
[Switch A-Ethernet 1/0/10] port link-type hybrid
[Switch A-Ethernet 1/0/10] port hybrid vlan 2 3 10 tagged
[Switch A-Ethernet 1/0/10] quit
# Enable PIM DM and IGMP on VLAN 10.
[Switch A] multicast routing-enable
[Switch A] interface Vlan-interface 10
[Switch A-Vlan-interface10] pim dm
[Switch A-Vlan-interface10] igmp enable
2) Configure Switch B:
# Enable IGMP Snooping globally.
<Switch B> system-view
[Switch B] igmp-snooping enable
# Configure VLAN 10 as a multicast VLAN and enable IGMP Snooping on it.
[Switch B] vlan 10
[Switch B-vlan10] service-type multicast
[Switch B-vlan10] igmp-snooping enable
[Switch B-vlan10] quit
# Define the Ethernet 1/0/10 port as a hybrid port, add the port to VLAN 2, VLAN 3 and
VLAN 10, and configure the port to include VLAN tags in its outbound packets for VLAN
2, VLAN 3 and VLAN 10.
[Switch B] interface Ethernet 1/0/10
[Switch B-Ethernet 1/0/10] port link-type hybrid
[Switch B-Ethernet 1/0/10] port hybrid vlan 2 3 10 tagged
[Switch B-Ethernet 1/0/10] quit
# Define the Ethernet 1/0/1 port as a hybrid port, add the port to VLAN 2 and VLAN 10,
and configure the port exclude VLAN tags from its outbound packets for VLAN 2 and
VLAN 10, VLAN 2 as the default VLAN of the port.
[Switch B] interface Ethernet 1/0/1
[Switch B-Ethernet 1/0/1] port link-type hybrid
To Next Page
Loading...
Need help?
General