Operation Manual – System Maintenance and Debugging
Quidway S3100 Series Ethernet Switches Chapter 1
BootROM and Host Software Loading
Huawei Technologies Proprietary
1-12
<Quidway> ftp 10.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):abc
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get s3100.bin
[ftp] get s3100.btm
[ftp] bye
Step 2: Update the BootROM program on the switch.
<Quidway>boot bootrom s3100.btm
This will update BootRom file on unit 1. Continue? [Y/N] y
Upgrading BOOTROM, please wait...
Upgrade BOOTROM succeeded!
Step 3: Update the host program on the switch.
<Quidway>boot boot-loader s3100.bin
The specified file will be booted next time on unit 1!
<Quidway>display boot-loader
Unit 1:
The current boot app is: s3100.bin
The main boot app is: s3100.bin
The backup boot app is:
Restart the switch.
<Quidway> reboot
 Note:
Before restarting the switch, make sure other configurations are all saved to avoid the
loss of configuration information.
After the above operations, the BootROM and host software loading is completed.
Pay attention to the following:
z The loading of host software takes effect only after you restart the switch with the
reboot command.
z If the space of the Flash memory is not enough, you can delete the useless files in
the Flash memory before software downloading.
To Next Page
Loading...
Need help?
General