Port Silk Screen Function
MBS Maintenance bypass mode
BATT TEMP Connects the battery temperature sensor.
USB Supports the serial port communications
protocol. The USB port can be used to
export logs and send serial port
commissioning commands.
BATT.COM1 Used for battery communication
COM2/CAN Used for ECC800 communication
COM3_IN ● Support the Modbus-RTU
communications protocol.
● Used for communication between
parallel UPSs
COM3_OUT
PARALLEL1/Parallel cable 1 Connect UPS parallel cables.
PARALLEL2/Parallel cable 2
INTELLISLOT/Intelligent
slot
Reserved for an optional card
UPS2000-H-(6 kVA-10 kVA)
User Manual 2 Product Overview
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 29
To Next Page
Loading...
