Huawei UPS2000-H - Page 38

Table 2-4 Functions of ports on the 10 kVA UPS
Port Silk Screen Function
BATTERY/Battery PE Connect battery cables.
BATTERY/Battery +
BATTERY/Battery –
AC INPUT/AC input N Connect input cables.
AC INPUT/AC input L1
AC INPUT/AC input L2
AC INPUT/AC input L3
AC OUTPUT/AC output N Connect output cables. The AC OUTPUT/AC
output SL port connects to primary loads,
and the AC OUTPUT/AC output PL port
connects to secondary loads.
AC OUTPUT/AC output SL
AC OUTPUT/AC output PL
EPO Emergency power-o
MBS Maintenance bypass mode
BATT TEMP Connects the battery temperature sensor.
USB Supports the serial port communications
protocol. The USB port can be used to
export logs and send serial port
commissioning commands.
BATT.COM1 Used for battery communication
COM2/CAN Used for ECC800 communication
UPS2000-H-(6 kVA-10 kVA)
User Manual 2 Product Overview
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 30