Huawei WIFI AX2 - Disable or Enable Link+ Feature on Router

To Next Page

To Previous Page

36 How do I disable or enable the Link+

feature on my router

You can disable or enable a router's Link+ feature through the web-based

management page. If Link+ is disabled and you want to use your router with

another device that supports Link+, such as another router, a Wi-Fi extender, you

will not be able to use a single H (or Hi) button to establish a HarmonyOS Mesh+

network. Wi-Fi names and passwords from multiple devices will not automatically

synchronize, and multiple Wi-Fi networks will appear in your home.

To disable the Link+ feature, follow these steps:

Step 1 Connect your computer to the router's Wi-Fi (or connect the computer to the

router's LAN port using an Ethernet cable). In the browser address bar, enter the

default IP address and log in to the router's web-based management page(check

the nameplate at the bottom of the router for the default IP address).

NO TE

For routers that feature self-adaptive ports, you do not need to distinguish between WAN

and LAN ports.

Step 2 Go to More Functions > Network Settings > Link+ Settings, and toggle Link+

o and Save to disable the Link+ feature.

HUAWEI_WIFI_AX2

36 How do I disable or enable the Link+ feature on

my router

Other manuals for Huawei WIFI AX2