Huawei WIFI AX2 - Configure Port Mapping Rules on Router

To Next Page

To Previous Page

56 How do I congure port mapping

rules on my HUAWEI router?

Port mapping allows you to map a port on your router's WAN IP address to a

computer within a LAN. When you use the Internet to access a specic port on the

WAN IP address (for example, in order to access a webcam on a home network),

the router will check the port value against the port mapping rules, then map your

service request to the

specic port on the local IP of the computer.

To congure port mapping rules:

Step 1 Connect your computer to the router's Wi-Fi (or connect the computer to the

router's LAN port using an Ethernet cable). Enter the default IP address in your

browser address bar and log in to the web-based management page(check the

nameplate at the bottom of the router for the default IP address).

NO TE

● For routers that feature self-adaptive ports, you do not need to distinguish between

WAN and LAN ports.

● Routers currently support setting 32 port mapping rules.

Step 2 Go to More Functions > Security Settings > NAT Services and click the

icon

in the upper right corner of Port Forwarding to add a new port mapping service.

HUAWEI_WIFI_AX2

56 How do I congure port mapping rules on my

HUAWEI router?

Other manuals for Huawei WIFI AX2