42 How do I disable WAN/LAN auto-
adaptive of the network port on a HUAWEI
router?
For routers that support WAN/LAN auto-adaptive, you do not need to distinguish
between the WAN port (dialup port) and LAN port (network access port), but you
will be able to access the Internet by inserting the network cable into any port.
WAN/LAN auto-adaptive is enabled by default, and can be disabled or enabled
again if required. To do so, perform the following:
1. Connect your phone or computer to the router's Wi-Fi (or to the router's any
port using an Ethernet cable). In the address box of a browser, enter the
default IP address to log in to the web-based management page of the router.
(For the default IP address, see the nameplate on the bottom of the router.)
If you are connecting your phone to the router's Wi-Fi network, switch your phone's
webpage to the PC-based UI before performing the following operations.
2. Choose More Functions > System Settings > Network port settings > WAN
port, select Fixed, and click Save to disable the WAN/LAN auto-adaptive
function. If you want to enable this feature again, select Auto and click Save.
HUAWEI_WIFI_AX2
HUAWEI_WIFI_AX2
42 How do I disable WAN/LAN auto-adaptive of the
network port on a HUAWEI router?
Issue 01 (2022-02-18) Copyright © Huawei Technologies Co., Ltd. 148