58 How do I enable UPnP on my
HUAWEI router?
When Universal Plug and Play (UPnP) is enabled, computers in the Local Area
Network (LAN) can request the router to automatically perform port conversions.
This way, computers on the Internet can access the resources on LAN computers
(such as MSN Messenger, Thunder, BT, PPLive and other Apps that support the
UPnP protocol) when needed, allowing you to enjoy a more stable network while
watching online videos or using Apps to download
les.
Step 1 Connect your computer to the router's Wi-Fi (or connect the computer to the
router's LAN port using an Ethernet cable). Enter the default IP address in your
browser address bar and log in to the web-based management page(check the
nameplate at the bottom of the router for the default IP address).
For routers that feature self-adaptive ports, you do not need to distinguish between WAN
and LAN ports.
Step 2 Go to More Functions > Network Settings > UPnP. UPnP is disabled by default,
but you can toggle UPnP to turn it on or
o.
HUAWEI_WIFI_AX2
HUAWEI_WIFI_AX2 58 How do I enable UPnP on my HUAWEI router?
Issue 01 (2022-02-18) Copyright © Huawei Technologies Co., Ltd. 194